The latest iteration of the Selkirk Boomstik introduces a new technology: Sharktooth™ Groove Technology.
Sharktooth is a precisely shaped groove around the perimeter of the paddle face. It works as a hinge, allowing the face to flex and "bite" the ball for more dwell time, so players get more spin and softer resets without losing the power needed for drives and putaways.
Power paddles have typically come with a trade-off. A stiff face adds pace to the ball, but can be difficult to control when executing the soft game.
Selkirk's Sharktooth™ Groove Technology, which debuts on the Boomstik® ST™, was built to close that gap.
Here's how a single groove changes the way the face meets the ball, and why it matters for both spin and control.
Dwell time 101
Dwell time is how long the ball stays in contact with the paddle face during a shot. It's a tiny window, measured in milliseconds, but it shapes nearly everything about how a shot comes off the paddle.
More dwell gives you three things:
- More spin. Spin comes from the face gripping the ball and dragging it as you brush through. The longer the ball stays on the face, the more time the surface has to transfer rotation.
- More feel. A longer contact gives your hand more feedback about where and how you struck the ball.
- More control. A ball that sinks into the face slightly before it releases leaves more predictably, which helps when you need precision over pace.
The challenge is that the traditional ways to add dwell, like a softer face or thicker core, often cost you power.
How the Sharktooth Groove works
The "ST" in Boomstik® ST™ stands for Sharktooth™ Technology. It's a groove cut around the perimeter of the face, modeled off a great white shark's tooth. You can see it at the edge of the paddle, where the face meets the handle.

That groove acts as a hinge point. Instead of the whole face reacting as one rigid plate, the groove gives the face a defined place to flex at impact. The face can then "bite" the ball, holding it a moment longer before releasing it.
How a the Sharktooth Groove adds spin and control
A hinge at the perimeter lets the face respond to the shot you're hitting, instead of forcing one feel on every swing.
On drives and putaways, you're swinging fast and striking firmly. The Boomstik's PureFoam™ BoomCore™ and Multistrata carbon face still do the heavy lifting here. Because the groove retains speed across the whole face, you keep the explosive power the Boomstik is known for, even on off-center hits.
On resets and dinks, you're absorbing pace with a soft, compact stroke. The groove's flex lets the face bite the ball and hold it a beat longer. That extra dwell gives you more time to take pace off the ball and shape your shot.
Across the face, the groove runs around the entire perimeter. The face responds evenly whether you catch the ball in the center or closer to the edge, so spin and speed hold steady.
Why Sharktooth pairs with InfiniGrit® Ultra
Spin depends on dwell time and how well the surface grips the ball. Sharktooth handles dwell time, and InfiniGrit Ultra adds extra grip.
|
|
InfiniGrit® Ultra |
Sharktooth™ Groove Technology |
|---|---|---|
|
What it is |
USA Pickleball-approved surface texture |
Perimeter groove that acts as a hinge point |
|
What it adds |
Grip: 4x more friction than original InfiniGrit® |
Time: more dwell as the face bites the ball |
|
Durability |
50x the texture hardness, 2x grit durability |
Built into the face design |
|
What you feel |
Heavier topspin and slice, spin that lasts |
Softer resets, sharper dips, consistency across the face |
A grippy surface with a brief contact window can only do so much. A long contact window with a smooth surface can't create much rotation either.
Together, they give the ball more grip for longer, which is what lets you shape shots game after game.